Start up and first ride

To turn the Fly12 CE on and start recording, press and hold the power button for at least 2 seconds.

Upon powering on, the Fly12 CE will play a power up sequence of beeps followed by up to 4 beeps to indicate battery level.

The LED notification light on the side of your camera will flash indicating it is recording, with the colour of the flashing LED also indicating the battery level.

Battery level is 75%+ 4 beeps LED light flashes green
Battery level is 50-75% 3 beeps LED light flashes green
Battery level is 25-50% 2 beeps LED light flashes orange
Battery level is under 25% 1 beep LED light flashes red

For more information on the sounds emitted by the Fly12 CE check out our visual and audio alerts guide here.

Pressing the power button will toggle through the brightness and light modes of the bike light; constant, pulse, flash or camera only.

Other settings can be customised through the CycliqPlus mobile app or desktop app. These include:

  • Logo and timestamp (on/off)
  • Electronic Image Stabilisation
  • Video resolution
  • Segment length
  • Light modes available
  • Volume of beeps
  • Beep intervals

Ready to check out what you #ShotontheFly? See Reviewing your Fly12 CE footage.

Can't find what you're looking for?

Create a support ticket

Submit a ticket