The Fly12 bike alarm can be activated via the CycliqPlus mobile app.

Once activated, if your Fly12 is moved (including if your bike is moved while the Fly12 is attached), it will sound an alarm and the lights will begin to flash and the camera will start recording.

You will receive an alert notification on your smartphone via Bluetooth (if you are in Bluetooth range).

The bike alarm can be turned off (if you are in Bluetooth range) via the CycliqPlus mobile app.

Manual over-ride of bike alarm

If the alarm is active but cannot be stopped, press both the power button and Q button until the alarm stops. This normally takes around eight seconds.