Charging your Fly12 CE
Your Fly12 CE comes partially charged. Before using it for the first time, please charge the device fully.
To charge:
1. Connect your device to a USB wall charger (not supplied) using the supplied USB cable.
2. The charge indicating light will illuminate showing that the device is charging.
3. When the device is fully charged the LED will illuminate green.
You can charge your Fly12 CE using the USB cable provided and your computer, however this will significantly reduce the rate of charge. For the quickest charge, use a USB wall charger with a capacity of 10w 5V 2.0A
Note:
Fly12 CE122 is ‘Fast Charge’ compatible and accepts up to 2.1amps. Accordingly, the time to charge from flat to fully charged varies from 2.5 to 8 hours depending on the method of charging, i.e. mains power USB at 2.1A (not supplied) or computer USB (at as little as 0.5A). For maximum battery life, fully discharge the battery before re-charging. Battery life will diminish over time and charge cycles.
Latest videos
-
The Month That Was October | Compilation | Caught on the Cycliq Fly12 and Fly6
-
Hoppers Crossing Hotspot | Compilation | Caught on the Cycliq Fly12 and Fly6
-
The Month That Was May | Compilation | Caught on the Cycliq Fly12 and Fly6
-
Hooks | Bad Driving Compilation | Caught on the Cycliq Fly6 and Fly12
-
Angry Fly Kick | Angry Driver | Caught on the Cycliq Fly6
-
Terrifying Crash | Caught on the Cycliq Fly6
-
OVER THE BONNET | Wipeout | Caught on the Cycliq Fly12
-
Fool Intentions | Truck Close Pass | Caught on the Cycliq Fly6 and Fly12
-
How to adjust Fly6 settings on a computer
-
How to adjust Fly6 settings on a mobile
-
How to adjust Fly12 settings on a computer
-
How to adjust Fly12 settings on a mobile
-
How to edit your footage on a mobile
-
How to format your Fly6 on a mobile
-
How to format your Fly12 on a mobile