To turn the Fly6 CE on and start recording, press and hold the power button for at least 2 seconds.
Upon powering on, the Fly6 CE will play a power up sequence of beeps followed by up to 4 beeps to indicate battery level.
The round bezel around the camera lens will emit a red light that rotates and the LEDs underneath the bezel will light up – this indicates that the device is recording.
|Battery level is 75%+||4 beeps|
|Battery level is 50-75%||3 beeps|
|Battery level is 25-50%||2 beeps|
|Battery level is under 25%||1 beep|
For more information on the sounds emitted by your device check out the visual and audio alerts guide here.
Pressing the Q button will toggle through the brightness of the bike light, while pressing the power button toggles through light modes; constant, pulse, flash or camera only.
Other settings can be customised through the CycliqPlus mobile app or desktop app. These include:
- Logo and timestamp (on/off)
- Electronic Image Stabilisation
- Video resolution
- Segment length
- Light modes
- Beep intervals
Ready to check out what you #ShotontheFly? See Reviewing your Fly6 CE footage.
Can't find what you're looking for?
Create a support ticket