Incident Protection Function

The Fly12 CE has been designed to save footage from major incidents without being recorded over and without you having to do anything.

Incident Protection is activated when the Fly12 CE is tilted more than 60o from the vertical (or 30o from the ground) for more than five seconds. If this happens, your Fly12 CE will lock the current and immediately preceding video segment and will then turn off after 30 minutes. This prevents the footage from being overwritten by the video looping technology.

The amount of video footage captured per segment can be set at 5, 10 or 15-minute segments.

If your Fly12 CE tilts over 60 degrees for more than 5 seconds and you don’t want the incident protection program to be activated and turn off your device after 30 minutes, you can:

• Turn off, then turn your Fly12 CE back on and use normally; or
• When the 3 long beeps sound (indicating your Fly12 CE is shutting down), wait for it to turn off, then turn it back on and use normally

Note: The Incident protection function can be turned off via the CycliqPlus mobile app or via your PC or Mac, however this is not recommended.