Charging the Battery

The Fly12 CE is an unsupported Fly device, check out our latest Fly devices.

Your Fly12 CE comes partially charged. Before using it for the first time, please charge the device fully.

To charge:

  1. Connect your device to a USB wall charger (not supplied) using the supplied USB cable.
  2. The charge indicating light will illuminate showing that the device is charging.
  3. When the device is fully charged the LED will illuminate green.

You can charge your Fly12 CE using the USB cable provided and your computer, however this will significantly reduce the rate of charge.

For the quickest charge, use a USB wall charger with a capacity of 10w 5V 2.0A

Note: The Fly12 CE (CE122) is ‘Fast Charge’ compatible and accepts up to 2.1amps. Accordingly, the time to charge from flat to fully charged varies from 2.5 to 8 hours depending on the method of charging, i.e. mains power USB at 2.1A (not supplied) or computer USB (at as little as 0.5A). For maximum battery life, fully discharge the battery before re-charging. Battery life will diminish over time and charge cycles.

Can't find what you're looking for?

Create a support ticket

Submit a ticket