Fly6 Pro
Fly12 Sport
Fly6 GEN 3
Compare
ULTIMATE BUNDLE
ESSENTIAL BUNDLE
Fly6 Pro
Fly12 Sport
Fly6 GEN 3
Mounts
Cases
Jackets
View All Accessories
Desktop app
Mobile app
Firmware
VideosQUICK START GUIDE
FLY6 CE GENERATION2
Register now
Registering your new Fly6 is important. You’ll receive notifications of new firmware updates, software, features, and user tips. To register your device, click the link below or use the CycliqPlus mobile app.
Setting up your Fly6 CE Generation2
Follow these instructions to set up your Fly6 and get riding in no time!
Please ensure your safety tether is attached for every ride. View how to attach your safety tether.
Quick Start Video Guide
Stop, Lock, UpRide
The Fly6 CE has 'Incident Protection' that automatically protects important footage from being recorded over.
- Stop Incident Protection mode is activated when the Fly6 is tilted more than 60° from the vertical. If this happens, it will lock the current video segment and protect it from being recorded over.
- Lock If you witness an event you want to protect, simply press and hold the Q button for 2 seconds. This will lock the current video segment.
- UpRide After your ride, you can access your footage directly with any desktop computer using the USB cable or on mobile via an OTG cable. Don't forget to upload your footage to UpRide.cc. Record your ride. Make it count.
Caring for your Fly6 CE Generation2
Follow these steps to ensure your Fly6 Gen2 operates at peak performance.
-
Firmware
updates Regularly check for updates to the firmware on your device by connecting your unit to the CycliqPlus app. You can modify settings and update the firmware, so your unit always has the latest features. -
Securing
the flap Ensure the flap is always closed securely when riding to avoid water and dirt leaking into your device. Failure to do so will void your warranty. -
Formatting
SD card We highly recommend formatting your SD card regularly. This will ensure your Fly6 Gen2 operates at peak performance and guarantee your ride is always recorded. This can be done via the CycliqPlus app. -
Cleaning
your Fly6 Ensure the flap is securely closed while cleaning the device. To avoid scratches and damage to the lens only clean with a soft damp cloth. Avoid using chemicals, detergents or excessive water.
Caution
- Warning! No modification of this device is allowed.
- The Fly6 CE is not a toy: children should not play with the device.
- Do not look directly at the LED lights when operating.
- Do not immerse the Fly6 CE in water or any other liquid.
- Avoid dropping or knocking the Fly6 CE in any way.
- Pay attention and care when closing the waterproof USB door. Please ensure it is closed completely prior to operation.
- No liability can be accepted for any damage caused by non-compliance with these instructions or any other improper use or mishandling.
- The Fly6 CE has a lithium-ion battery. When disposing of this, it should be done in compliance with the laws, rules and regulations of your relevant local authorities.
Disclaimer
Fly6 CE Generation2 is designed specifically to be used as a rear ‘tail’ light with video and audio recording capabilities for bicycles. While every effort has been made to ensure it will fit most bicycles on the market, it may not fit all bicycles, depending on the setup.
Please note that Cycliq, its subsidiaries and affiliates, and its distributors are not liable for any consequential damages arising from any malfunction of the device, including memory cards.